[an error occurred while processing this directive]

FIT5020 Multimedia computing and communications - Semester 1 , 2008

Unit leader :

Raymond Smith

Lecturer(s) :

Gippsland

  • Raymond Smith

Introduction

Welcome to FIT5020 Multimedia Computing and Communications.

Unit synopsis

This unit covers requirements, research issues and current technology of multimedia computing and communications. Contents include: characteristics and requirements of different media types, quality of service issues, MM compression techniques and standards, MM operating system and end system architecture, MM networking and transport protocols, MM information indexing and retrieval, and example MM systems and applications in business.

Learning outcomes

On completion of this unit students will be able to

  • 1. describe differences of characteristics and requirements between alphanumeric data and multimedia data;
  • 2. describe research issues in multimedia computing and communication;
  • 3. explain why the notion of quality of service is important;
  • 4. explain common multimedia compression techniques and standards;
  • 5. describe multimedia networking requirements and techniques;
  • 6. describe multimedia information indexing and retrieval techniques; and
  • 7. understand operation principles of common multimedia systems and applications.
  • Workload

    For on campus students, workload commitments are:

    * two-hour lecture and
    * two-hour tutorial (or laboratory) (requiring advance preparation)
    * a minimum of 2-3 hours of personal study per one hour of contact time in order to satisfy the reading and assignment expectations.
    * you will need to allocate up to 5 hours per week in some weeks, for use of a computer, including time for newsgroups/discussion groups.

    Off-campus students generally do not attend lecture and tutorial sessions, however, you should plan to spend equivalent time working through the relevant resources and participating in discussion groups each week.

    Unit relationships

    Prerequisites

    Before attempting this unit you must have satisfactorily completed

    FIT9005 Computer Networks and Architecture or equivalent

    Relationships

    FIT5020 is a elective unit for the Master of Information Technology, Master of Business Systems and Master of Applied IT degrees.

    You may not study this unit and GCO5805 in your degree.

    Continuous improvement

    Monash is committed to ‘Excellence in education' and strives for the highest possible quality in teaching and learning. To monitor how successful we are in providing quality teaching and learning Monash regularly seeks feedback from students, employers and staff. Two of the formal ways that you are invited to provide feedback are through Unit Evaluations and through Monquest Teaching Evaluations.

    One of the key formal ways students have to provide feedback is through Unit Evaluation Surveys. It is Monash policy for every unit offered to be evaluated each year. Students are strongly encouraged to complete the surveys as they are an important avenue for students to "have their say". The feedback is anonymous and provides the Faculty with evidence of aspects that students are satisfied and areas for improvement.

    Student Evaluations

    The Faculty of IT administers the Unit Evaluation surveys online through the my.monash portal, although for some smaller classes there may be alternative evaluations conducted in class.

    If you wish to view how previous students rated this unit, please go to http://www.monash.edu.au/unit-evaluation-reports/

    Over the past few years the Faculty of Information Technology has made a number of improvements to its courses as a result of unit evaluation feedback. Some of these include systematic analysis and planning of unit improvements, and consistent assignment return guidelines.

    Monquest Teaching Evaluation surveys may be used by some of your academic staff this semester. They are administered by the Centre for Higher Education Quality (CHEQ) and may be completed in class with a facilitator or on-line through the my.monash portal. The data provided to lecturers is completely anonymous. Monquest surveys provide academic staff with evidence of the effectiveness of their teaching and identify areas for improvement. Individual Monquest reports are confidential, however, you can see the summary results of Monquest evaluations for 2006 at http://www.adm.monash.edu.au/cheq/evaluations/monquest/profiles/index.html

    Unit staff - contact details

    Unit leader

    Dr Raymond Smith
    Lecturer
    Phone +61 3 990 26462

    Lecturer(s) :

    Dr Raymond Smith
    Lecturer
    Phone +61 3 990 26462

    Additional communication information

    For inquiries of a personal nature email is the preferred contact method.

    More general inquiries should be directed to the appropriate discussion forums, so the reply is available for all students.

    Teaching and learning method

    All students are provided with comprehensive study guides, detailing the content of the unit topic by topic. Students studying by distributed learning work through this material, independently.

    The study guides are on-line in addition to tutorial tasks and solutions, assignment specifications and other supporting resources.

    Communication, participation and feedback

    Monash aims to provide a learning environment in which students receive a range of ongoing feedback throughout their studies. You will receive feedback on your work and progress in this unit. This may take the form of group feedback, individual feedback, peer feedback, self-comparison, verbal and written feedback, discussions (on line and in class) as well as more formal feedback related to assignment marks and grades. You are encouraged to draw on a variety of feedback to enhance your learning.

    It is essential that you take action immediately if you realise that you have a problem that is affecting your study. Semesters are short, so we can help you best if you let us know as soon as problems arise. Regardless of whether the problem is related directly to your progress in the unit, if it is likely to interfere with your progress you should discuss it with your lecturer or a Community Service counsellor as soon as possible.

    Unit Schedule

    Week Topic Study guide Key dates
    1 Overview of MM Systems 1  
    2 Media data types and formats 2  
    3 ADC, Lossless and Audio Compression 3  
    4 Image and Video Compression 3  
    Mid semester break
    5 Multimedia Communications Overview 4  
    6 Network Support for MM Comms 5 Ass 1 due 10/04/2008
    7 LAN and ATM 5  
    8 Internet QoS support 6  
    9 Internet QoS support (cont) 6  
    10 MM Information Indexing and Retrieval 7  
    11 Indexing and Retrieval (cont) 7 Ass 2 due 14/05/2008
    12 Mobile and Wireless Communication Issues 8  

    Unit Resources

    Prescribed text(s) and readings

    No textbook needs to be purchased

    Recommended text(s) and readings

  • A Reader containing a number of book chapters and journal papers will be provided.
  • A number of online articles are available from the unit's Library Reading List
  • Equipment and consumables required or provided

    Students studying off-campus are required to have the minimum system configuration specified by the Faculty as a condition of accepting admission, and regular Internet access.On-campus students, and those studying at supported study locations may use the facilities available in the computing labs.Information about computer use for students is available from the ITS Student Resource Guide in the Monash University Handbook.

    You will need to allocate up to 6 hours per week for use of a computer, including time for newsgroups/discussion groups.

    Study resources

    Study resources we will provide for your study are:

    The FIT5020 web site on MUSO/BlackBoard, where lecture slides, weekly tutorial requirements, assignment specifications, sample solutions and supplementary material will be posted. This web site also contains:

    * the Unit Book containing 8 Study Guides (in .pdf format).
    * newsgroups / discussion forums
    * this Unit Information outlining the administrative information for the unit
    * sample examination paper with solutions

    Library access

    The Monash University Library site contains details about borrowing rights and catalogue searching. To learn more about the library and the various resources available, please go to http://www.lib.monash.edu.au.  Be sure to obtain a copy of the Library Guide, and if necessary, the instructions for remote access from the library website.

    Monash University Studies Online (MUSO)

    All unit and lecture materials are available through MUSO (Monash University Studies Online). Blackboard is the primary application used to deliver your unit resources. Some units will be piloted in Moodle.

    You can access MUSO and Blackboard via the portal (http://my.monash.edu.au).

    Click on the Study and enrolment tab, then Blackboard under the MUSO learning systems.

    In order for your Blackboard unit(s) to function correctly, your computer needs to be correctly configured.

    For example :

    • Blackboard supported browser
    • Supported Java runtime environment

    For more information, please visit

    http://www.monash.edu.au/muso/support/students/downloadables-student.html

    You can contact the MUSO Support by: Phone: (+61 3) 9903 1268

    For further contact information including operational hours, please visit

    http://www.monash.edu.au/muso/support/students/contact.html

    Further information can be obtained from the MUSO support site:

    http://www.monash.edu.au/muso/support/index.html

    If your unit is piloted in Moodle, you will see a link from your Blackboard unit to Moodle at http://moodle.med.monash.edu.au.
    From the Faculty of Information Technology category, click on the link for your unit.

    Assessment

    Unit assessment policy

    To pass this unit, a student must obtain :

    * 40% or more in the unit's examination and
    * 40% or more in the unit's non-examination assessment
    and
    * an overall unit mark of 50% or more

    If a student does not achieve 40% or more in the unit examination or the unit non-examination assessment then a mark of no greater than 44-N will be recorded for the unit.

    Students must attempt all assignments and the examination

    Assignment tasks

    • Assignment Task

      Title : Media compression

      Description :

      Students will be asked to describe, compare and calculate certain aspects of the various compression types used in MM

      Weighting : 25%

      Criteria for assessment :

      Questions asking for numerical calculation will be assessed for correctness or if not completely correct following recognised and logical steps.

      Discussion and comparison questions will be assessed according to the knowledge displayed, the breadth and depth of discussion and the logical presentation of arguments.

      Due date : 10 April 2008

    • Assignment Task

      Title : Quality of Service

      Description :

      Students will be asked to describe and compare aspects of Quality of Service for MM applications

      Weighting : 25%

      Criteria for assessment :

      Discussion and comparison questions will be assessed according to the knowledge displayed, the breadth and depth of discussion and the logical presentation of arguments.

      Due date : 14 May 2008

    Examinations

    • Examination

      Weighting : 50%

      Length : 3 hours

      Type ( open/closed book ) : Closed book

    Assignment submission

    All student assignments will be submitted by electronic submission to the Webface system at wfsubmit.its.monash.edu.au.

    Do not email submissions. The due date is the date by which the submission must be received.

    University and Faculty policy on assessment

    Due dates and extensions

    The due dates for the submission of assignments are given in the previous section. Please make every effort to submit work by the due dates. It is your responsibility to structure your study program around assignment deadlines, family, work and other commitments. Factors such as normal work pressures, vacations, etc. are seldom regarded as appropriate reasons for granting extensions. Students are advised to NOT assume that granting of an extension is a matter of course.

    Requests for extensions must be made to the unit lecturer at your campus at least two days before the due date. You will be asked to forward original medical certificates in cases of illness, and may be asked to provide other forms of documentation where necessary. A copy of the email or other written communication of an extension must be attached to the assignment submission.

    Late assignment

    Assignments received after the due date will be subject to a penalty of 5% for each day an assignment is late, up until the cutoff date. No assignment will be accepted after the cutoff date (usually 1 week after the due date).

    Return dates

    Students can expect assignments to be returned within two weeks of the submission date or after receipt, whichever is later.

    Assessment for the unit as a whole is in accordance with the provisions of the Monash University Education Policy at http://www.policy.monash.edu/policy-bank/academic/education/assessment/

    We will aim to have assignment results made available to you within two weeks after assignment receipt.

    Plagiarism, cheating and collusion

    Plagiarism and cheating are regarded as very serious offences. In cases where cheating  has been confirmed, students have been severely penalised, from losing all marks for an assignment, to facing disciplinary action at the Faculty level. While we would wish that all our students adhere to sound ethical conduct and honesty, I will ask you to acquaint yourself with Student Rights and Responsibilities (http://www.infotech.monash.edu.au/about/committees-groups/facboard/policies/studrights.html) and the Faculty regulations that apply to students detected cheating as these will be applied in all detected cases.

    In this University, cheating means seeking to obtain an unfair advantage in any examination or any other written or practical work to be submitted or completed by a student for assessment. It includes the use, or attempted use, of any means to gain an unfair advantage for any assessable work in the unit, where the means is contrary to the instructions for such work. 

    When you submit an individual assessment item, such as a program, a report, an essay, assignment or other piece of work, under your name you are understood to be stating that this is your own work. If a submission is identical with, or similar to, someone else's work, an assumption of cheating may arise. If you are planning on working with another student, it is acceptable to undertake research together, and discuss problems, but it is not acceptable to jointly develop or share solutions unless this is specified by your lecturer. 

    Intentionally providing students with your solutions to assignments is classified as "assisting to cheat" and students who do this may be subject to disciplinary action. You should take reasonable care that your solution is not accidentally or deliberately obtained by other students. For example, do not leave copies of your work in progress on the hard drives of shared computers, and do not show your work to other students. If you believe this may have happened, please be sure to contact your lecturer as soon as possible.

    Cheating also includes taking into an examination any material contrary to the regulations, including any bilingual dictionary, whether or not with the intention of using it to obtain an advantage.

    Plagiarism involves the false representation of another person's ideas, or findings, as your own by either copying material or paraphrasing without citing sources. It is both professional and ethical to reference clearly the ideas and information that you have used from another writer. If the source is not identified, then you have plagiarised work of the other author. Plagiarism is a form of dishonesty that is insulting to the reader and grossly unfair to your student colleagues.

    Register of counselling about plagiarism

    The university requires faculties to keep a simple and confidential register to record counselling to students about plagiarism (e.g. warnings). The register is accessible to Associate Deans Teaching (or nominees) and, where requested, students concerned have access to their own details in the register. The register is to serve as a record of counselling about the nature of plagiarism, not as a record of allegations; and no provision of appeals in relation to the register is necessary or applicable.

    Non-discriminatory language

    The Faculty of Information Technology is committed to the use of non-discriminatory language in all forms of communication. Discriminatory language is that which refers in abusive terms to gender, race, age, sexual orientation, citizenship or nationality, ethnic or language background, physical or mental ability, or political or religious views, or which stereotypes groups in an adverse manner. This is not meant to preclude or inhibit legitimate academic debate on any issue; however, the language used in such debate should be non-discriminatory and sensitive to these matters. It is important to avoid the use of discriminatory language in your communications and written work. The most common form of discriminatory language in academic work tends to be in the area of gender inclusiveness. You are, therefore, requested to check for this and to ensure your work and communications are non-discriminatory in all respects.

    Students with disabilities

    Students with disabilities that may disadvantage them in assessment should seek advice from one of the following before completing assessment tasks and examinations:

    Deferred assessment and special consideration

    Deferred assessment (not to be confused with an extension for submission of an assignment) may be granted in cases of extenuating personal circumstances such as serious personal illness or bereavement. Information and forms for Special Consideration and deferred assessment applications are available at http://www.monash.edu.au/exams/special-consideration.html. Contact the Faculty's Student Services staff at your campus for further information and advice.